![Image for product 'Kingston KVR24S17S6/4 ValueRam [1x 4 GB, SO-DIMM DDR4, 2400 MHz, 260-pin, Green]'](https://www.qwerty.eu/images/artikelen/large/1057404_big.jpg "Artikel 1057404: Kingston KVR24S17S6/4 ValueRam
Product specs: 1x 4 GB, SO-DIMM DDR4, 2400 MHz, 260-pin, Green")
![Image for product 'Kingston KVR24S17S6/4 ValueRam [1x 4 GB, SO-DIMM DDR4, 2400 MHz, 260-pin, Green]'](https://www.qwerty.eu/images/artikelen/large/1057404_2.jpg "Artikel 1057404: Kingston KVR24S17S6/4 ValueRam
Product specs: 1x 4 GB, SO-DIMM DDR4, 2400 MHz, 260-pin, Green")
ValueRAM's KVR24S17S6/4 as a512M x 64-bit (4GB) DDR4-2400 CL17 SDRAM (SynchronousDRAM), 1Rx16, memory module, based on four 512M x 16-bitFBGA components.
The SPD is programmed to JEDECstandard latency DDR4-2400 timing of 17-17-17 at 1.2V. This260-pin SODIMM uses gold contact fingers.
Features
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 8 internal banks; 2 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18” (30.00mm)
• RoHS Compliant and Halogen-Free
